BRUSHBOND GREY (7.05kg)
Non-returnable
- Select Weight
- Select Items
- Quantity
Product Details
BRUSHBOND GREY (7.05kg) -
Applied directly to the damp concrete and masonry
Excellent adhesion - Bonds to porous and nonporous surfaces.
Non-toxic-ideal for potable water tanks
Waterproof - Excellent for damp-proofing basements
Excellent for concrete roof, leaking brick and masonry walls
- Preparation All the surfaces which are to receive Brushbond, must be free from oil, grease, wax, dirt or any other form of foreign matter which might affect adhesion. Spalled and deeply disintergrated concrete should be removed to sound concrete and repaired with Renderoc System.
- Mixing Nitobond BB is poured into a plastic or metal drum. To this, an equal volume of clean fresh water is added, for brush application consistency. Then mixing is started with a slow speed drill (350-450 rpm). The powder component is added gradually to the liquid avoiding lump formation and mixed for 2-4 minutes. Mix and use. More material should not be mixed than can be used within pot life. Retempering with water should not be done. Keep on stirring during application.
- Mixing Ratio Powder 6 kg Nitobond BB 1 L Water 1 L
- Application For best results moisten the surface before coating with Brushbond. Apply the mixed material using a short, stiff bristle brush preferably 100 to 150mm width like a paint. Trowel applications can be undertaken as necessary using the correct mixing ratio to obtain satisfactory consistency. Brushbond shall be applied in two coats to achieve 1mm thickness. The second coat of Brushbond shall applied as soon as the first coat has reached touch dry state.
